Fuel Saver #103 One Time Fuel Saver
Fuel Savers have been marketed since 1992 after years of research we highly recommend the Fuel Saver #103 The product incorporates (3) Powerful Fuel Cells and is one of the most innovative automotive products EVER marketed. It adapts to any vehicle, diesel or gas and has shown to greatly reduce fuel consumption in oil, gas or propane furnaces too.
25 years of development/research
State-of-the-art design
Simple to install
No maintenance
Save up to 53% on Vehicle Fuel Bills
Works on all Vehicles, Boats & Gas Furnaces
Small one time investment
Lifetime warranty
Money back guarantee
Made in the USA
The Fuel Saver #103 is designed with three highly focused energy cells that create an energy field when secured around any fuel line. By nature all molecules are polar, and tend to be attracted to other similar molecules forming "clumps." The energy field generated by the #103 causes fuel molecules to polarize or "flip" in an attempt to align with the energy field, dispersing the "clumps" into smaller particles & making the molecules more available for combustion. The #103 is the ultimate & best unit that we have ever made to date. It consists of (3) Fuel Cells and gave the highest fuel savings on all vehicles tested. Equally impressive were the results experienced when the #103 was placed on fuel lines of oil, gas and propane furnaces.
Installation Requires No Tools! The Fuel Saver #103 contains (3) powerful energy saving fuel cells as shown above and it is adequate for any 2, 4, 6, or 8+ cylinder vehicle. Fasten Cells one after the other on the incoming fuel line, NOT the outgoing fuel line. If both lines are very close together, then wrap #103 around both incoming and outgoing fuel lines, for best results. Fasten by wrapping cells around incoming line within six to twelve inches of the engine, if at all possible fasten between the fuel injector incoming fuel line or carburetor and fuel filter. Fasten onto fuel rubber hose line only and never the metallic fuel line if at all possible. After installing fasten extra cable ties around each Fuel Cell for safety! The #103 works well on not just cars and pickups but on Tractor Trailers, Buses, Motor Homes & other larger vehicles, and gas and oil furnaces and even airplanes. However, you will need to double your order to two complete sets of #103 (that’s (6) powerful fuel saving energy cells) for even better results on larger vehicles. On tractor-trailers you can now get as close as necessary to your fuel injectors in order to maximize fuel savings. Order extra Fuel Cells and attach them to the diesel fuel line at the fuel tank(s), doing this will help reduce gelling of fuel during extreme cold winter conditions.
Fuel Saver #103 Examples Of Fuel Saved:
• 2002 Ford Explorer was 15 mpg but with #103 went to 22 mpg, 47% better gas mileage.• 2000 Infinite 130t was 24.3 now 28.1 mpg, 16% better gas mileage.
• Jeep Grand Wagoneer V-8 was 11.8 mpg now 14.8 mpg, 25% better gas mileage.
• 2002 Dodge diesel went from 14.3 to 17.3 mpg, 21% better gas mileage.
• 2002 Volkswagen Jetta went from 20 mpg to 26 mpg, 30% better gas mileage.
• 1999 Ford Ranger before - 15 mpg to 19 mpg, 27% better gas mileage.
• 2000 Ford Excursion - 15 mpg to 19 mpg, 27% better gas mileage..
• Chevy Z-71 - 19 mpg to 22 mpg, 16% better gas mileage.
• 2000 Town & Country Minivan - 22 mpg to 27, 23% better gas mileage.
• 2001 PT Cruiser - 14 mpg to 19 mpg, 36% better gas mileage.
• 2002 Dodge Ram Pickup - 27 mpg to 33 mpg, 22% better gas mileage.
• Lincoln Stretch Limo’s got 17% better gas mileage and then switched from premium gas to the lowest octane available and had no loss of power or performance.
• 1996 Chevy S-10 4-wh, w/Tahoe package, 4.3 Vortec V-6, 20 mpg to 26 mpg, 30% better.
• 1994 Pontiac Transport Van, V-6, was 18.4 mpg now 28 mpg, 53% better gas mileage.
• 1998 BMW Z3 - 1.9 - was 15.5 now 20.5 mpg, 32% better gas mileage.
• Motor Home 26’ with Chevy Vortex 7.4 liter V-8 engine was 7.9 now 10.9 mpg, 38% better.
• Tractor Trailer 440 CAT diesel, with quad injectors was 5.3 now 6.5 mpg, 23.6% better!
Higher MPG (Miles Per Gallon) Finer dispersion of molecules by the energy field makes a higher percentage of the hydrocarbon molecules available for combustion, resulting in more efficient fuel consumption with less waste. Obviously, more efficient fuel consumption results in significant savings in fuel expenses over the life of a vehicle. But consider the long-term cumulative benefits of increasing fuel economy on a great number of vehicles, nationwide. Less nationwide consumption of fuels means less dependence on foreign oil sources, and helps protect our natural areas from unnecessary oil exploration.
More Power Higher efficiency in burning fuels means more power from the same amount of fuel. Many users now report that they are using regular fuel instead of premium with no noticeable change in power, and no "pinging" or "knocking. Very often the perceptible increase in power is the benefit #103 users notice first. Dynamometer tests have confirmed an increase of both power and torque on most engines checked.
Cleaner Engine Cleaner burning fuel results in fewer deposits of carbon inside your engine, & for higher mileage cars with existing carbon buildup, a gradual but progressive decrease in carbon deposits has been reported over time. Mechanics checking high-mileage cars with an #103 installed for a significant period of time often report their astonishment at the reduction of carbon deposits inside the engine & around fuel injectors.
Lower RPMs
Another benefit of more efficient fuel utilization is the reduction of RPMs on most vehicles. Immediately after installing an #103 mechanics and car owners often report a decrease in both idling RPMs and the RPMs required at highway speeds. Lower RPMs result in longer engine life, and less wear and tear. Special attention to idling RPMs can provide confirmation of correct installation. After installation RPMs should be significantly lower than before installation. (Up to 150 RPMs less is typical)
Think of a need & fill it with our #103
Lower Emission (Pollution)
More efficient fuel consumption and combustion results in a smaller portion of waste molecules (Emissions) out the tail pipe. Lower emissions produce a number of benefits; less buildup of unburned carbon in the engine and decreased maintenance costs to keep a vehicle within emissions standards. Lower emissions result in less pollution being released in the air, making the environment cleaner for generations to come. Examples of before and after emissions tests taken from actual users' emissions results will be shown. Once the #103 is installed, it gives a substantial and immediate improvement in performance and up to 80% reduction in hydrocarbon and carbon monoxide emissions.
FREQUENTLY ASKED QUESTIONS
Will #103 work on my car?
The #103 is designed to treat fuel. The energy field generated by the #103 will have the same effect on every fuel type. It doesn't matter if you drive a 2, 4, 6, 8, 10+ cylinders or larger gas or diesel vehicles and over-the-road Diesel Tractor Trailers, the #103 should improve fuel efficiency and horse power.
Will #103 work on my furnace?
The #103 has the same effect on gasoline, diesel, natural gas and fuel oil, regardless of application. Significant savings have been realized when using these units with oil-fired furnaces.
Will #103 wear out, or need maintenance?
The energy cells used in the #103 have a life of about 400 years so they should still be quite effective for years to come. #103 requires no maintenance, other than periodic inspection to assure that it is firmly attached to the fuel line & is in the proper position to avoid wear to the line or adjacent components.
Will #103 make my car run better?
Yes! Improved fuel efficiency will have a noticeable effect on almost every aspect of how your vehicle runs. However the #103 will do little or nothing to compensate for a vehicle in poor running condition or that has been poorly maintained. Insuring that your vehicle has clean air filters, fuel filters, free flowing exhaust and a properly operating engine will help ensure a long vehicle life and optimal results from the #103.
When will I begin to see results?
Depending upon the age and condition of your vehicle, the amount of time until you see measurable results will vary. In most cases, with a vehicle in good condition and under normal driving conditions, you should feel an increase in power almost immediately and begin getting an increase in fuel mileage and lower emissions after using about two full tanks of fuel. Some high mileage vehicles will take significantly longer but it will eventually work perfectly on them too.
How long does installation take?
On a typical installation, it will require only 5 to 15 minutes, depending on the location and accessibility of the fuel lines. Installation on most vehicles is quite simple, requires only a limited mechanical ability (Example: which line is the incoming fuel line to engine fuel injectors or carburetor?) Installation can be done without the use of any tools. A pair of old gloves is recommended. See Installation for simple details.
Does the #103 have a warranty?
Yes! The #103 is warranted for life on the original vehicle. Since the #103 has no moving parts and requires no maintenance it should provide you with many lifetimes of fuel savings, increased power and reduced emissions. If not abused, the #103 should last many lifetimes on your autos, trucks, boats and home furnaces.
Does the #103 have a money-back guarantee?
Yes! We are so confident that the #103 will work for you that we have a 60-day money back guarantee. If for any reason you are not satisfied with the #103 you can return it in it's original container for a full refund within 60-days of your purchase.
The New #103 has produced Savings of up to 53% and better on vehicle fuel costs! That's better fuel savings on cars, trucks, boats, furnaces, motorcycles, 4-wheelers and private airplane too.
Note: While we cannot recommend it, because the #103 has not yet been FAA Certified, some researchers (wishing to remain anonymous) who fly their own Private Airplanes have installed units on their aircraft. Initial reports indicate a 20%+ reduction in fuel consumption.
Aircraft owners who do their own experimental research are excited, but we must again stress the fact that the #103 is not yet approved by the FAA! While we have no control over how our customers use their #103 units, we discourage any application of the technology that might run contrary to Federal, State or Local laws and regulations. Researchers have also found that a #103 saves up to 40%+/- on Natural Gas, Propane, & Oil Furnace fuel bills! While it works best when installed on rubber type flexible fuel lines and copper or aluminum fuel lines, we have also received positive reports when used with steel fuel lines.
The Fuel Saver #103 (#103) has been improved over all our previous FS Units and has shown MPG increases up to 53%+ on some vehicles we’ve tested. It works on all Cars, Trucks, Tractor Trailers, Motor Homes and all Oil, Gas & Propane Furnaces. #103 is easier to install than earlier designs and should work very well on all vehicle models, both foreign & domestic, and it costs 25%-50% less than the original FS technology.
#103 as shown below is “state of the art” technology! It fits around fuel lines in even the tightest areas, adapting to all twists & turns, on practically any vehicle you can imagine.
#101=Good #102 = Better #103 = BEST Value!
Installation Requires No Tools!
The #103 contains (3) powerful energy saving fuel cells as shown above and it is adequate for any 2, 4, 6, or 8+ cylinder vehicle. Fasten Cells one after the other on the incoming fuel line, NOT the outgoing fuel line. Fasten by wrapping cells around incoming line as close to engine as possible, between fuel injectors or carburetor & fuel filter. Fasten to hose not the metallic line when possible.
Note: Many users have also had great success spacing the fuel cells at other locations along the incoming fuel line. Owners may wish to experiment with location and spacing between #103 fuel cells for maximum benefit in their specific situation. After installing fasten extra plastic tie also!
The #103 should work well on Tractor Trailers, Buses, Motor Homes & other larger vehicles. However, you may wish to double your order to two complete sets of #103 (that’s (6) powerful fuel saving energy cells) for even better results on larger vehicles. On tractor-trailers you can now get as close as necessary to fuel injectors attached to the engine in order to maximize fuel savings. Order extra Fuel Cells & attach to the diesel fuel line at the fuel tank(s) to reduce gelling of fuel during extreme cold conditions. Once #103 is installed remember fasten extra plastic tie to each cell.
INSTALLATIONS CONTINUED
Once all three energy saving fuel cells of the #103 are installed, your vehicle MPG should begin to improve. In some cases it will be gradual because of the cleansing effect taking place inside your engine. The #103 helps to remove old carbon buildup in your engine over time. You can expect more horsepower, greater fuel economy, and possibly a longer lasting engine.
Based on performance of older technologies, the #103 should help clean out carbon buildup in engines very well. So, after installation and perhaps five or more tanks full of fuel, it is suggested you change engine oil and filter. Check how much carbon and blackness is visible in that oil. After two or three oil and filter changes you should find that your oil shows less discoloration over a longer time frame than before, indicating a cleaner burning engine.
In time you should see a steady improvement in your fuel savings. Experts say “it works on every vehicle 100% of the time, over time", quote unquote! Some vehicles respond more quickly & much better than others do at first, but eventually all should show improvement as engines with higher time and mileage are “cleaned up” and begin operating more efficiently.
The #103 has absolutely proven
itself to out perform all other designs tested.
These new #103 have been designed so that it should last many life times. Tests also indicate #103 may extend the life of your engine dramatically, since it helps to attenuate and thin out existing and even future carbon build up.
Inspections show there is little to NO noticeable added carbon build up after properly installing and using the #103. Installation usually takes only about 10 minutes, whether you are a housewife or a mechanic! The #103 has been designed to fit easily in the tightest of spots. Vehicle fuel lines often twist and turn many times. Other “fuel savers” (with lesser technology and frequently higher costs) can be difficult or nearly impossible to install. NOT so with #103! This product is designed for ease of installation in almost every conceivable application. In most cases it is not necessary to cut or splice any fuel lines, or alter anything on your vehicle to install #103! Should installation prove, for any reason, to be beyond the scope of a customer, we advise either employing the services of a licensed and qualified mechanic to perform the installation or returning the product for a cheerful refund. We DO NOT pay for any costs associated with installation of the #103.
EXCEPTIONS TO THE RULE and A
WORD OF CAUTION REGARDING FUEL LINES.
If you have a steel fuel line, or one that is magnetically attractive, (both cases mentioned are very rare) it may have a negative effect on performance of the #103. We DO NOT recommend any type of unapproved modification to accommodate the unit but are also aware that vehicle owners often modify their equipment to meet their own specific needs. For those who choose to ignore our advice and modify their fuel lines, it would seem prudent to hire a licensed and qualified mechanic to perform a professional, safe and reliable alteration. He or she would probably cut a 6-12 inch section out of the existing fuel line and splice an approved rubber type fuel line in its place for best results.
But first, try #103 without having a professional mechanic cut and splice in a rubber type fuel line. (All rubber type fuel lines, aluminum & copper are OK & will perform well with a #103. Fuel lines that are attracted to magnetic fields might not permit the #103 to perform at peak efficiency but it may still provide a considerable improvement over your previous mileage figures.)
You should be very happy, even amazed with the results of your #103. If not, you may send your three-piece Fuel Cell Unit back undamaged in its original container within 60 days for a full money back guarantee.
Use #103 on Gas, Oil and Propane Furnaces Too! In gas, propane and especially oil furnaces the combustion conditions are improved by applying #103 around the fuel line just before injector. The flame becomes brighter and turns from red to white orange. A high temperature bright flame is observed. The flame is reduced in vertical length and extended laterally. The rate of combustion becomes higher. Spark in the flame is reduced or eliminated. Vibrating combustion is prevented. Pollution material content in exhaust gas is reduced.
· #103 Increases Vehicle Fuel Mileage Up To 53%,
With proper use of a #103 it’s been found that
you may obtain the following results:
8% - 38%++ Increase in MPG on All Vehicles, Cars & Tractor Trailers.
8% - 30% Decrease in Oil, Gas & Propane Furnaces Fuel Consumption.
60% - 80% Reduction in Carbon Monoxide Emissions.
80% - 90% Reduction in Hydrocarbon Emissions.
50% - 90% Reduction in Nitrogen Oxides.
We have reports from Farmers using the #103 attached to hose at each sprinkler head, they are now getting up to 100%+ increase in crop yields! The #103 changes water viscosity, making it wetter. Try #103 in your own garden by fastening it around your water hose near the sprinkler heads & you’ll see the results for yourself! #103 also helps prevent mineral deposits!
Some Of The Scientist’s, Inventors and Research Engineers
Who Have Worked With Us On The Fuel Saver Project & Others!
Ø Expert on Superconductivity at Room Temperature!
Ø Nicola Tesla Experts, some with 30+ years experience!
Ø Designer of Tracking Systems for NASA!
Ø Prior Chief Research Engineer at Battelle Auto Technology!
Ø Experts with Master Degrees in Diesel Mechanics!
Ø Experts on Internal Combustion Engines!
Ø Ex-Manager of 12 Electric Power Production Plants!
Ø Renowned Dr. of Electrical Engineering
Ø Mechanical Engineering Experts!
Ø Engineers, Machinists, Master Mechanics & Cad Experts!
Ø Dr. Beck Inventor of the MPG & Electric Flash Technology!
Find a Fuel Saving Need & Fill It With #103
Please be aware, there are "knockoffs" out there and none of them that we know of have the engineering expertise or research we have invested in our #103. If you purchase a lesser product, expect lesser performance and you probably won't be disappointed. If you want true "State of the Art" technology, we are at your service.
More Research On Tractor Trailers On 1/27/04 this Official Test Results #010504DR came in on one of our Test Trucks using the #103. The #103 was installed on a Freightliner Tractor Trailer Truck, which has a 440 CAT diesel engine with quad injectors on 1/05/04. Since installing the #103 the truck has traveled 10,726 miles hauling and average payload of 40,000 lbs.. Mileage has risen from 5.3 mpg to 6.5 mpg, that is a 22.6% increase in fuel savings since installation on 01/05/04.
This Official Test #010504DR and its 440 CAT mileage is precisely tracked with a totally computerized fuel system giving the exact footpath of performance. The results are consistent and everyone is excited about the fuel savings and apparent horsepower improvement!
OFFICIAL TEST RESULT #010504DR of a CORRECTLY INSTALLED #103 on a FREIGHTLINER DIESEL TRUCK
Before fastening the #103 on the incoming fuel line of this Freightliner Truck, which has a 440 CAT diesel engine, Official Test #010504DR, our test driver mentioned he needed a tune up. One of his injectors was clogged and causing a miss in his engine. Within 200 miles or so after installing the #103 his mileage increased by 22.7%. Later on his injector miss went away completely, which he claims saved hundreds of dollars in repair bills just to fix the injector! He said it’s all because of the #103 installation!
Another fact that occurred, his idle speed was always consistent at 500 rpm before #103 was installed. Within minutes after installing the #103 the Motor’s rpm speed increased from 500 rpm to 625+ rpm and has remained constant since then, this signifies more horsepower through better-burnt fuel and thus less fuel used too! Install if at all possible on incoming fuel line between the motor & the fuel filter, if you cannot then install on the opposite side of fuel filter. Another fact the driver pointed out is that, before installing the #103 correctly he noticed while cruising at the same speed, climbing the same hill, and carrying virtually the same 40,000 lb. payload as before. Under all the same conditions mentioned above, he is now pulling the same hills (all conditions the same) and his mpg only drops to 3.5 mpg versus 1.9 mpg as in the past, before installing the #103 correctly. Can you imagine what this could do for the Trucking Industry as well as all municipalities and privately owned vehicles in America?
60 Day Money Back Guarantee! Prices Subject To Change.
P.O. Box 522003 Salt Lake City UT 84152![]()
![]()
![]()
888-485-9797
LEGAL NOTICE - DISCLAIMER Warning: Statements expressed within this site have
not been evaluated by the Food and Drug Administration. Any and all information
and/or statements found within this site are for educational purposes only and
are NOT intended to diagnose, treat, cure, prevent disease or replace the advice
of a licensed healthcare practitioner. Note also, this website may contain links
to other websites operated by other parties. These links are provided for your
convenience and reference only. Great Solutions LLC is not responsible for the
content or products of any linked site or the links contained therein. Great
Solutions LLC does not dispense medical advice, prescribe, or diagnose illness.
Any views and ideas expressed are not intended to be a substitute for
conventional medical advice or service. You agree that no responsibility or
liability will be incurred to any person or entity with respect to any loss,
damage, or injury caused or alleged to be caused directly or indirectly by the
information contained within this site. If you have a severe medical condition,
please see a licensed healthcare practitioner. Wellness Pro products are NOT Rife frequency
healing machines. While this website may refer to Rife type or similar frequency healing
devices, studies or theories, in some context, such references have no
application to Wellness Pro products. Wellness Pro products have no application
to frequency healing theories and any representation, suggestion or implication of otherwise is contrary to the
Wellness Pro products manufacturer’s specific and FDA cleared application.
Wellness Pro products are ONLY intended for, and have proper application to, the
relief of pain.